Products - The HT Series
Injection Conditions
For Injection molding references (most olefin plastic machines can be used) Compression ratio: 2.4 and higher
| Cylinder Temperatures | |
| Feed Zone | 175-185℃ |
| Center Zone | 185-195℃ |
| Front Zone | 190-205℃ |
| Nozzle | 190-210℃ |
| Mold Temperature | 40~50℃ |
| Injection Pressure | 35-50 kg/cm2 |
| Injection rate | Fast |
| Hold Time | 5 sec. |
| Screw Speed | Medium |
| Back Pressure | 5-10 kg/cm2 |
| Cycle Time | 15~20 sec. |
| (Goods material thickness under 2mm) | |
Please maintain the material melt temp. around 180℃ to 220℃ during processing, but not exceeding 230°C.