Products - The 600 Series
Injection Conditions
Injection molding refernces (most olefin plastic machines can be used) Compression ratio: 2.0 and higher
| Cylinder Temperatures | |
| Feed Zone | 165-175℃ |
| Center Zone | 175-190℃ |
| Front Zone | 185-195℃ |
| Nozzle | 185-200℃ |
| Mold Temperature | 40~50℃ |
| Injection Pressure | 35-50 kg/cm2 |
| Injection rate | Fast |
| Hold Time | 5 sec. |
| Screw Speed | Medium |
| Back Pressure | 5-8 kg/cm2 |
| Cycle Time | 15~30 sec. |
| (Goods material thickness under 2mm) | |
Please maintain the material melt temp within 180℃ to 200℃ during process, but not exceeding 230°C.