Products - The 300 Series
Injection Conditions
For Injection molding references (most of olefin plastic machine can be used) Compression ratio: 2.0 and higher
| Cylinder Temperatures | |
| Feed Zone | 165-175℃ |
| Center Zone | 175-185℃ |
| Front Zone | 185-195℃ |
| Nozzle | 180-190℃ |
| Tooling Temperature | 40~50℃ |
| Injection Pressure | 30-40 kg/cm2 |
| Injection rate | Moderate |
| Hold Time | 5 sec. |
| Screw Speed | Medium to high |
| Back Pressure | 5 kg/cm2 |
| Cycle Time | 20~30 sec. |
| (2mm Goods material thickness under 2mm) | |
Please keep the material melt temp. around 160℃ to 190℃ during processing, but not exceeding 200°C.